Pentair Kreepy Krauly Legend II Feed Hose – White – 6 ft. Section (LX17)

The feed hose (6 ft. section) is a replacement part that was made by Pentair. The same high-quality materials were used to manufacture the original factory part. Making this a genuine OEM product.

The feed hose is the second link in a chain of hoses that provide the cleaner with pressurized water that powers the entire cleaner and the cleaning process. This water comes from the pool system via the filtration pump (this means a booster pump is not required for this cleaner) and out of the wall fitting with a debris screen, where it finally reaches this hose to be pushed even further into the cleaner and into the venturi jets. This makes it capable of sucking and pulling up dirt, debris, and other forms of mulch off your pool’s surface for a crystal-clear look.

The hose itself is white and an inch and a half in diameter and made from a strong plastic compound that also allows it to expand just enough while the low-pressure water makes its way through and into the cleaner. If this part was made from any other material the potential for failure or damage would be at severely high risk. It can be found on the top end of the feed mast making it easy to identify for a replacement if necessary.